TB-500 10 mg lyophilised vial
SpedizioneTracciata dall’Unione europea
Spedizione nello stesso giorno lavorativoPer ordini prima delle 14:00
Dogana e importazioneVerifica le regole del paese di destinazione
Contatto direttoWhatsApp ed e-mail

Comprare TB-500 in Europa

Materiale liofilizzato per la ricerca di laboratorio

da €44.95 per unità
Scegli il formato
TB-500 1 × €44.95
€44.95
Offerta peptidi
Spedizione tracciata
Calcolata al pagamento
Totale prima della spedizione
€44.95

Solo per ricerca di laboratorio in vitro. Non destinato all’uso su esseri umani o animali.
Informazioni sulle analisi · Spedizione · Resi

Comprare TB-500 in Europa

TB-500 · 10 mg

Il nome TB-500 non identifica un’unica struttura chimica. Il rapporto 222317 indica il campione analizzato come “TB-500 (TB-4)”. Non conferma in modo indipendente la sequenza, la forma salina o il numero CAS del materiale offerto.

La quantità indicata è il contenuto totale dichiarato del flaconcino, non una dose o la concentrazione di una soluzione.

Rapporti di laboratorio · 222317. Il rapporto collegato descrive il campione analizzato. Non conferma il contenuto di ogni flaconcino venduto.

Spedizione in Italia

Spedizione tracciata dall’Unione europea. Costi e opzioni disponibili sono mostrati prima della conferma dell’ordine.

Tutti i prodotti di laboratorio · Calcolatore di ricostituzione · Spedizione in Italia

Documentazione scientifica originale (inglese)

TB-500 (Thymosin β4 Peptide) 10 mg

The name TB-500 does not resolve to a single molecule, and this page says so rather than picking one. Two chemically distinct materials are sold under it. One is full-length thymosin β4, a 43-residue N-acetylated peptide with a formula of C212H350N56O78S and an average mass near 4963.5 g/mol, registered as CAS 77591-33-4 in its free form and CAS 1346423-89-9 as the acetate salt. The other is the N-acetylated 17-23 fragment, Ac-Leu-Lys-Lys-Thr-Glu-Thr-Gln, CAS 885340-08-9, formula C38H68N10O14, average mass near 889.0 g/mol. The two differ by more than five-fold in mass. The specification table on this page is therefore left blank until the certificate of analysis for the material on sale has been read, and the identifiers will be published there afterwards.

All presented information is based on scientific publications which can be found at the end of product description below.

  1. 1Usage of peptide

    The product is intended for scientific research and development purposes only. Chemical substances shall not be used as a drug, medicine, active substance, medical aid, cosmetic product, a substance for production of a cosmetic product neither for human consumption that is any food or food supplement or otherwise similarly used on humans or animals. Intended only for in-vitro research, such as Receptor-ligand binding studies, Enzyme activity assays, Cell proliferation assays, Cell signaling assays, Epitope mapping, ect.

  2. 2Peptides in transport

    Peptides in lyophilized form are supplied in glass vials by standard shipping methods and do not require refrigeration. Short-term temperature fluctuations during transport will not reduce their quality and efficacy. Even at high summer temperatures, the peptides in lyophilized form are stable for several weeks.

  3. 3Storage of lyophilized peptides

    Upon receiving the lyophilized peptide, store at 4 °C or colder and away from bright light. Lyophilized peptides are stable at room temperature for weeks, but for longer-term storage, it is safer to store at -20 °C or colder. Exposure to moisture will greatly decrease long-term stability of lyophilized peptides. Before using the peptide, remove from cold storage and allow the peptide to equilibrate to room temperature before removing the lid of the container, in order to reduce the uptake of moisture that is present in the surrounding atmosphere.

  4. 4Storage of peptide solutions

    The shelf life of peptide solutions is limited. Freezing the aliquots will prolong the storage life of the peptide. What is globally accepted for peptides in solution is that they are generally stable for 3 or more weeks at +4°C and for 3-4 months at -20°C. Avoid repeated freeze-thaw cycles, as this can degrade the peptides.

Used solely for in vitro experiments and cannot be:

  • Used in clinical trials involving humans
  • Administered to humans as part of an experiment or investigation
  • Supplied to another party for human investigational use
Altre informazioni
Ricerca e fonti originali (inglese)

Description of TB-500

The name TB-500 does not resolve to a single molecule, and this page says so rather than picking one. Two chemically distinct materials are sold under it. One is full-length thymosin β4, a 43-residue N-acetylated peptide with a formula of C212H350N56O78S and an average mass near 4963.5 g/mol, registered as CAS 77591-33-4 in its free form and CAS 1346423-89-9 as the acetate salt. The other is the N-acetylated 17-23 fragment, Ac-Leu-Lys-Lys-Thr-Glu-Thr-Gln, CAS 885340-08-9, formula C38H68N10O14, average mass near 889.0 g/mol. The two differ by more than five-fold in mass. The specification table on this page is therefore left blank until the certificate of analysis for the material on sale has been read, and the identifiers will be published there afterwards.

The independent evidence on the name leans toward the fragment. The Global Substance Registration System operated by the United States FDA and NCATS registers TB-500 as a substance in its own right, UNII QHK6Z47GTG, CAS 885340-08-9, with the subunit sequence LKKTETQ, and files the 43-residue peptide under separate records: timbetasin, the international nonproprietary name for the synthetic peptide, UNII 2D5MRE3SSY, CAS 77591-33-4; timbetasin acetate, UNII 945CRJ0XZ0, CAS 1346423-89-9; and native human thymosin β4 carrying its phosphorylation and lysine acetylation, UNII 549LM7U24W, CAS 77642-24-1. Esposito and colleagues analysed a commercial TB-500 formulation by high-performance liquid chromatography coupled to high-resolution Orbitrap mass spectrometry and identified the heptapeptide Ac-LKKTETQ in it (Drug Testing and Analysis, 2012). Some suppliers nonetheless ship the full-length peptide under the same name, which is why identity here is a matter for the certificate of analysis rather than for the product title.

The parent molecule is well characterised. Thymosin β4 is encoded in humans by the TMSB4X gene, UniProt P62328. The translated 44-residue product loses its initiator methionine and the exposed serine at position 2 is acetylated, giving the mature N-terminal sequence Ac-Ser-Asp-Lys-Pro across 43 residues. Safer, Elzinga and Nachmias describe it as an acidic, heat-stable 5 kDa peptide (Journal of Biological Chemistry, 1991), and Philp and colleagues describe it as the most abundant member of the β-thymosin family in mammalian tissue (FASEB Journal, 2003). The chain contains a single methionine, which accounts for the sole sulfur atom in its molecular formula, and no cysteine, so it carries no disulfide bridges. Residues 17 to 23 of the mature chain are LKKTETQ, the actin-binding motif, and that stretch is the fragment from which the smaller material is taken. Material of this type is prepared by solid-phase peptide synthesis or by recombinant expression, then purified by reversed-phase chromatography and lyophilised. Supplied lyophilised for laboratory research use only. Not for human or veterinary consumption.

Overview of Published Research

The biochemical starting point is actin binding. Safer, Elzinga and Nachmias reported that at least 50 percent of the actin in resting human platelets is unpolymerised and that the bulk of it is complexed with a heat-stable, acidic 5 kDa peptide, which they sequenced and found indistinguishable from thymosin β4. In their assays the purified peptide bound stoichiometrically to muscle G-actin, forming a complex identifiable by nondenaturing polyacrylamide gel electrophoresis, and formation of that complex inhibited salt-induced polymerisation of G-actin (Journal of Biological Chemistry, 1991;266(7):4029-4032). This is the property from which the term actin-sequestering derives. Every study summarised below used the full-length 43-residue peptide unless stated otherwise.

Philp and colleagues is the study that links the full-length peptide to the heptapeptide sold under the same TB-500 name. Using naturally occurring thymosin β4, proteolytic fragments and synthetic peptides, they reported that the full-length peptide and the seven amino acid actin-binding motif displayed near-identical activity at approximately 50 nM in human umbilical vein endothelial cell migration assays and in chick aortic arch vessel-sprouting assays, while peptides lacking any portion of the motif were inactive. Adhesion to thymosin β4 was blocked by the seven amino acid peptide, and the adhesion and sprouting activity was inhibited by the addition of 5 to 50 nM soluble actin (FASEB Journal, 2003;17(14):2103-2105).

In dermal models, Malinda and colleagues used a rat full-thickness wound model and reported that reepithelialisation increased by 42 percent over saline controls at 4 days and by as much as 61 percent at 7 days after wounding, with treated wounds contracting at least 11 percent more than controls by day 7. In the same paper, keratinocyte migration in a Boyden chamber assay was stimulated 2 to 3-fold over medium alone after 4 to 5 hours, with as little as 10 pg of peptide added to the assay (Journal of Investigative Dermatology, 1999;113(3):364-368).

A separate strand of work concerns cardiac tissue. Bock-Marquette and colleagues reported that the peptide promoted myocardial and endothelial cell migration in the embryonic heart and retained that property in postnatal cardiomyocytes, and that it formed a functional complex with PINCH and integrin-linked kinase resulting in activation of Akt. Following coronary artery ligation in mice, the authors reported upregulation of integrin-linked kinase and Akt activity in the heart, enhanced early myocyte survival and improved cardiac function (Nature, 2004;432(7016):466-472).

Published human studies concern pharmaceutical formulations of full-length thymosin β4, not the research material offered here. Ruff and colleagues reported an early safety and pharmacokinetic study (2010); Sosne and Ousler reported an ophthalmic study that did not meet its primary endpoints (2015). These studies do not establish the safety, efficacy, dosing or suitability of this product for use in humans or animals. The original references are provided below for evaluation of the research context.

References

  1. Safer D, Elzinga M, Nachmias VT. Thymosin beta 4 and Fx, an actin-sequestering peptide, are indistinguishable. Journal of Biological Chemistry. 1991;266(7):4029-4032. doi: PubMed
  2. Philp D, Huff T, Gho YS, Hannappel E, Kleinman HK. The actin binding site on thymosin beta4 promotes angiogenesis. FASEB Journal. 2003;17(14):2103-2105. doi: 10.1096/fj.03-0121fje · PubMed
  3. Malinda KM, Sidhu GS, Mani H, Banaudha K, Maheshwari RK, Goldstein AL, Kleinman HK. Thymosin beta4 accelerates wound healing. Journal of Investigative Dermatology. 1999;113(3):364-368. doi: 10.1046/j.1523-1747.1999.00708.x · PubMed
  4. Bock-Marquette I, Saxena A, White MD, Dimaio JM, Srivastava D. Thymosin beta4 activates integrin-linked kinase and promotes cardiac cell migration, survival and cardiac repair. Nature. 2004;432(7016):466-472. doi: 10.1038/nature03000 · PubMed
  5. Ruff D, Crockford D, Girardi G, Zhang Y. A randomized, placebo-controlled, single and multiple dose study of intravenous thymosin beta4 in healthy volunteers. Annals of the New York Academy of Sciences. 2010;1194:223-229. doi: 10.1111/j.1749-6632.2010.05474.x · PubMed
  6. Sosne G, Ousler GW. Thymosin beta 4 ophthalmic solution for dry eye: a randomized, placebo-controlled, Phase II clinical trial conducted using the controlled adverse environment (CAE) model. Clinical Ophthalmology. 2015;9:877-884. doi: 10.2147/OPTH.S80954 · PubMed
  7. Esposito S, Deventer K, Goeman J, Van der Eycken J, Van Eenoo P. Synthesis and characterization of the N-terminal acetylated 17-23 fragment of thymosin beta 4 identified in TB-500, a product suspected to possess doping potential. Drug Testing and Analysis. 2012;4(9):733-738. doi: 10.1002/dta.1402 · PubMed
Comprare TB-500 in Europa — FAQ

TB-500 — Dettagli e documentazione

Formato fornito

TB-500 · 10 mg · materiale liofilizzato destinato alla ricerca di laboratorio.

Rapporto di laboratorio pubblicato

Verifica presso Janoshik · 222317 Il risultato riguarda il campione analizzato. Non conferma il contenuto di ogni flacone venduto. Tutti i rapporti di laboratorio (English).

Spedizione e contatti

Tempi e costi variano in base al paese di destinazione. Consulta le informazioni di spedizione; i metodi di pagamento disponibili sono indicati al checkout. Informazioni di spedizione · Contatti (English).

Altre schede prodotto: GLP-3-RT · GHK-Cu · 141 Peptide · BPC-157 · MOTS-c · CJC-1295 (No DAC)

Altri prodotti

Altri prodotti

All products →
GLP-3-RT research vial
Disponibile

GLP-3-RT

€88.95

C221H342N46O68
Glow Blend research vial
Disponibile

Glow Blend

€101.95

GHK-Cu research vial
Disponibile

GHK-Cu

€34.95

C14H22CuN6O4
MT2 research vial
Disponibile

MT2

€49.95

C50H69N15O9
NAD+ research vial
Disponibile

NAD+

€63.95

C21H27N7O14P2

Prima del confronto: verificare l’identità

TB-500 e la proteina completa timosina beta-4 non sono denominazioni da scambiare automaticamente. La pubblicazione sul frammento analizzato non identifica ogni prodotto commerciale.

Janoshik 222317 · Verifica presso il laboratorio · 2026-09-04

Il rapporto riguarda il campione analizzato. Non offriamo una corrispondenza tra lotto e singolo flaconcino. Non dimostra sterilità o benefici clinici e non certifica ogni flaconcino venduto.

TB-500: frammento, timosina beta-4 e documentazione